TILING FORWET ROOMS

WET ROOMS

The most important thing for wet room projects is to ensure that the area is waterproof to prevent ingress and subsequent water damage, deterioration and microbiological growth within the building fabric.

Sika provides a complete integrated system to fulfill the very demanding requirements of these areas. Firstly the surfaces are made waterproof using a one-component cementitious mortar, which is highly flexible and fiber-reinforced. Then a flexible cementitious adhesive with a high polymer content is used for the tile installation, which is followed by a special highly deformable, waterproof, two- component, epoxy tile grout. This is designed to provide high chemical and abrasion resistance in the selected color shade. Finally, the system is completed with a high performance, antifungal, movement and connection joint sealant.

 

Products Usage:

Please select your country in order to learn more about the available local Sika solutions.

 

SURFACE PREPARATION

Sikafloor®-200 Level

Self levelling compound

 

WATERPROOFING MORTAR

Sikalastic®-1 K

One component cementitious mortar

 

WATERPROOFING TAPE

Sika® SealTape

Elastic sealing tape

 

TILE ADHESIVE

SikaCeram®-270 MultiFlow

Versatile fast-setting tile adhesive

 

TILE GROUT

SikaCeram® StarGrout

Epoxy based grout for joints from 1 to 15 mm width

 

SEALANT

Sikasil® C

Neutral-curing silicone sealant

 

Sikafloor®-200 Level

Shrinkage free, low emissions, cement based, self-levelling compound suitable for use interior and exterior

  • Waterproof
  • Rapid hardening
  • Suitable for use over underfloor heating systems (hot water systems)
  • Hard finish and good mechanical strengths

Sikalastic®-1 K

One component cementitious mortar, fiber-reinforced for flexible waterproofing and concrete protection

  • Good crack-bridging capability
  • Adjustable consistency
  • Easy to apply by brush or trowel
  • Optimum adhesion on building substrates e.g. concrete, mortar, ceramic tiles, clay bricks, wood etc.

Sika® SealTape

Elastic sealing tape for joints, connections, penetrations and terminations of waterproofing systems in wet areas

  • System component for sealing and waterproofing under tile and slab installations
  • For use interior and exterior, horizontally and vertically
  • For sealing movement and connection joints

SikaCeram®-270 MultiFlow

Versatile fast-setting tile adhesive with lightweight fillers and different application consistencies; C2 FTE S1 class in thin bed consistence and C2 FE S1 class in low-bed consistence.

  • 4 different application consistencies from thin-bed to low-bed
  • Deformable
  • Fast setting
  • No vertical slip
  • Very low emissions

Consumption

Go to: CONSUMPTION CALCULATOR

SikaCeram® StarGrout

Two-pack tile grout, based on epoxy resin with quartz aggregates and special admixtures. RG classified according to EN 13888. Can be used as tile adhesive (R2T).

  • High mechanical and chemical resistance
  • Excellent workability
  • Reduced odor
  • Easy to clean
  • Long-lasting finish

Consumption

Go to: CONSUMPTION CALCULATOR

Sikasil®-C

Neutral-curing silicone sealant for construction and sanitary applications

  • Ideal where providing additional sand is a problem
  • No shrinkage
  • Very good finishing
  • Rapid-hardening
  • Surface preparation
  • Waterproofing
  • Tile Adhesive
  • Tile Grouts
  • Sealant