Sika Tiling Systemfor Porcelain Tiles


Porcelain tiles are a highly durable type of ceramic tile, as they are produced under higher pressure and temperature to be extremely hard and non-absorbent. Therefore they are a typical choice for floors in public and commercial areas that are subject to heavy traffic such as those in airports, train stations, shopping centers and other showrooms. For these areas and exposure conditions it is necessary to use a tile installation system that is able to meet these requirements and accommodate the high stresses imposed on the floor.

This means providing a substrate with high compressive and tensile strengths, with a new generation of polymer modified tile adhesive designed for bonding non-absorbent materials; and finishing the system with a flexible tile grout that has a good mechanical strength and abrasion resistance, followed by a high performance polyurethane based elastic sealant for any moving or connections joints.


Products Usage:

Please select your country in order to learn more about the available local Sika solutions.

Sikaflex®-PRO-3   Steel mesh
SikaCeram® CleanGrout   Compressible material
SikaCeram®-255 StarFlex LD   Vapor barrier
Sika Screed® Binder    

Sika Screed® Binder

Hydraulic binder for screeds (4 – 10 cm) with normal setting, quick-drying and low shrinkage, for internal and external use.external use.

Needs to be mixed with aggregates.


1 m² at 10 cm thick = 1 bag of Sika Screed ® Binder + 200 kg of aggregate + 15 liter of water

SikaCeram®-255 StarFlex LD

Low dust emission, deformable powder adhesive to lay all types of ceramic tiles, even grès porcelain in large size. (C2TE S1)


Approx. 4 kg/m2


SikaCeram® CleanGrout

Cementitious Tile Grout for 1 – 8 mm width. Water repellent, anti-fungus, high abrasion resistance, with very stable colors. (CG2)


Approx. 0.110 kg/m2 (Tile size 50 x 50 x 1 cm, joint width 2 mm)



Elastic, one-part, high performance polyurethane based sealant, for use in horizontal and vertical joints subject to movement and exposure to water and many different chemical, both internally and externally.


1 cartridge 300 ml will make Approx. 12 m for a joint section of 5 x 5 mm

  • Surface preparation
  • Tile Adhesive
  • Tile Grout
  • Sealant