TILING WITHMARBLE, GRANITE
& OTHER NATURAL STONE TILES

TILING WITH MARBLE, GRANITE & OTHER NATURAL STONE TILES

Natural stone tiles are one of the most timeless and elegant finishing materials that never goes out of style.

Sika provides a complete installation system for marble, granite and other natural stone tiles, which is not sensitive to moisture. Subfloor screeds made with a hydraulic binder that ensures high compressive and tensile strengths, plus rapid hardening with very low shrinkage, thus allowing installation of the tiles after only 24 – 48 hours. For these natural stone materials, the Sika system uses a new generation of flexible, cementitious tile adhesive, with a high polymer content and low modulus that minimizes stress transfer. Finally, flexible, epoxy resin based grouts with high mechanical strengths and abrasion resistance are used, together with permanently elastic high performance non staining sealant for any moving joints and connections.

 

Products Usage:

Please select your country in order to learn more about the available local Sika solutions.

 

SURFACE PREPARATION

SikaScreed®-1

Premix product for screeds

 

TILE ADHESIVE

SikaCeram®-270 MultiFlow

Versatile fast-setting tile adhesive

 

TILE GROUT

SikaCeram® StarGrout

Epoxy based grout for joints from 1 to 15 mm width

 

SEALANT

SikaHyflex®-355

Sika® Primer-3 N *

High-performance non staining sealant

* For the sealant

   
   
 

SikaScreed®-1

Shrinkage free, ready-to-use screed, just add water.

  • Ideal where providing additional sand is a problem
  • No shrinkage
  • Very good Finishing
  • Rapid-hardening

 

SikaCeram®-270 MultiFlow

Versatile fast-setting tile adhesive with lightweight fillers and different application consistencies; C2 FTE S1 class in thin bed consistence and C2 FE S1 class in flow-bed consistence.

  • 4 different application consistencies from thin-bed to flow-bed
  • Deformable
  • Fast setting
  • No vertical slip
  • Very low emissions

 

 

Consumption

Go to: CONSUMPTION CALCULATOR

 

SikaCeram® StarGrout

Two-pack tile grout, based on epoxy resin with quartz aggregates and special admixtures. RG classified according to EN 13888. Can be used as tile adhesive (R2T).

  • High mechanical and chemical resistance
  • Excellent workability
  • Reduced odor
  • Easy to clean
  • Long-lasting finish

 

 

Consumption

Go to: CONSUMPTION CALCULATOR

 

SikaHyflex®-355

High performance weather sealant for natural stone applications

  • Non staining
  • Movement capability of ±35% (ASTM C719)
  • Solvent free
  • Very good weathering resistance

 

Sika® Primer-3N

One-component, epoxy combination primer to seal porous or absorbent joint substrates in exposed situations before application of the SikaHyflex®-355 joint sealant.

  • Surface preparation
  • Tile Adhesive
  • Tile Grout
  • Sealant