TILING DRYWALLSIN DRY AREAS

TILING DRYWALLS IN DRY AREAS

Drywall construction techniques and materials are the most widely used system to form the walls and ceilings in medical, hospitality, educational and urban housing developments today.

Sika provides a full system for the secure installation of tiles on these substrates. Firstly a primer is applied to seal the surface and prevent any gypsum contact with cement; then flexible dispersion on vertical application and cementitious tile adhesives with a high polymer content on horizontal application; followed by a two-component waterproof epoxy tile grout with high mechanical and chemical resistance. Finally the system is completed with a high performance, antifungal, elastomeric movement and connection joint sealant.

 

Products Usage:

Please select your country in order to learn more about the available local Sika solutions.

 

SURFACE PREPARATION

Sika Primer®-11 W *

Synthetic resin based primer
*not necessary with SikaCeram®-355 StarPaste

 

TILE ADHESIVE (wall)

SikaCeram®-355 StarPaste

Ready to use tile adhesive in paste

 

TILE ADHESIVE (floor and/or wall)

SikaCeram®-255 StarFlex LD

Deformable cementitious tile adhesive with low dust technology

 

TILE GROUT

SikaCeram® StarGrout

Epoxy based grout for joints from 1 to 15 mm width

 

SEALANT

Sikasil® C

Neutral-curing silicone sealant

   
 

Sika Primer®-11 W *

One-part, aqueous, synthetic resin based primer for preparing gypsum and cementitious surfaces.

  • One component, water-dispersed resin emulsion
  • Easy to dilute and use
  • Easy to control pinkish color
  • Easy to clean

*not necessary with SikaCeram®-355 StarPaste

SikaCeram®-355 StarPaste (wall)

Ready-to-use tile adhesive in paste, for ceramic tiles interior, specially designed for bathrooms and kitchens, perfect for drywalls, D2 TE classified according to EN 12004.

  • Ready to use
  • Dust-free
  • No vertical slip
  • Extended open time

SikaCeram®-255 StarFlex LD (floor and/or wall)

Low dust emissions, highly deformable adhesive; C2TE S1 classified according to EN 12004.

  • Low dust emissions
  • Deformable
  • No vertical slip
  • Extended open time
  • Frost proof
  • Applicable up to 15 mm thicknesses

Consumption

Go to: CONSUMPTION CALCULATOR

SikaCeram® StarGrout

Two-pack tile grout, based on epoxy resin with quartz aggregates and special admixtures. RG classified according to EN 13888. Can be used as tile adhesive (R2T).

  • High mechanical and chemical resistance
  • Excellent workability
  • Reduced odor
  • Easy to clean
  • Long-lasting finish

Consumption

Go to: CONSUMPTION CALCULATOR

Sikasil® C

Neutral-curing silicone sealant for construction and sanitary applications

  • Ideal where providing additional sand is a problem.
  • No shrinkage
  • Very good finishing
  • Rapid-hardening

  • Surface preparation
  • Tile Adhesive
  • Tile Grouts
  • Sealant